Q:
A: If it is a factory fit then you should have a key switch under the bonnet. If no key is present then pull the cover back under the key switch and cross the two contacts with wire this will silence the siren but your head lights will still flash. Next turn on the ignition and press the little switch at the side off the steering column cowls this will turn the alarm of . If you want to remove the alarm then there are two positions where they installed the control unit. Position 1 This relates to a 5 door model vehicle remove the drivers seat disconnect all the multiplugs there is a two pin plug with thick white wires going to it this is the immobiliser for the starter short them out and the engine should start. Position 2 This relates to a 3 door model the unit is located behind the O/S/R quarter panel cover do the same as position 1 wiring . Hope this helps