Q: I never used the code before and i completely forgot what it was. I know usually with fords you can find the number inside. But i have been searching with my vehicle? does anyone know where i can find the code to get inside my car without a key? THANK YOU SO MUCH!!
A: The answer above, applies to 2001 and older model years. To locate the original keypad code on your 2003 model year Mountaineer, open the right/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 3L2T-15K602-EA. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code. Hope this helps.